What Is Tadalafil Powder and How Is Its Quality Tested?
Ask 10 providers for an estimate on tadalafil powder, and you will get ten near-identical specification documents. If you ask them for a verified related compounds chromatogram, an elemental impurity report done by ICP, a polymorph confirmation, and a moisture stability record, the list becomes substantially shorter. That filter is where Hongda Phytochemistry likes to fight. Shaanxi Hongda Phytochemistry Co., Ltd., established in 2001, has a manufacturing area of about 20,000 m² and more than 10 production lines, 100,000-class purification workshops, and an SGS-standardised laboratory with more than 20 professor-level researchers using HPLC, GC, atomic absorption, and spectrophotometric instrumentation. Hongda is backed by cGMP, ISO 9001, ISO 22000, FSSC 22000, BRC, FDA registration, Halal and Kosher credentials and sells tadalafil powder to licensed pharmaceutical manufacturers and research institutes with a comprehensive, audit-ready analytical dossier attached to every batch.
Defining Tadalafil Powder: Identity Before Anything Else
The Chemical Identity Behind the Name
Tadalafil is a synthetic small molecule. Its chemical name is pyrazino-pyrido-indole-dione, CAS number 171596-29-5, and molecular formula is C22H19N3O4 (molecular weight = 389.4). Tadalafil powder as a raw material is a white to off-white crystalline powder, essentially insoluble in water, sparingly soluble in ethanol, and soluble in DMSO – solubility behaviour which influences nearly every downstream formulation option a client would make. Since the molecule has two specified stereocenters, Hongda’s typical identification procedure includes a polarimeter reading or chiral HPTLC/HPLC run since identity testing must not only validate the compound, but also the right stereochemistry. Buyers who will just accept a melting-point check as 'identification' are leaving a serious gap in their incoming products process.[6]
Physical Profile a Buyer Should Verify on Arrival
|
Attribute
|
Typical Hongda Value
|
Why It Matters to the Buyer
|
|---|---|---|
|
CAS No.
|
171596-29-5
|
Primary identity anchor
|
|
Molecular formula / weight
|
C22H19N3O4 / 389.40
|
Mass-balance and assay calculations
|
|
Appearance
|
White to off-white crystalline powder
|
First-line visual screen
|
|
Assay (HPLC, dried basis)
|
≥ 99.0%
|
Potency and cost-per-active
|
|
Single unknown impurity
|
≤ 0.10%
|
ICH Q3A identification threshold
|
|
Total impurities
|
≤ 0.5%
|
Downstream stability
|
|
Loss on drying
|
≤ 0.5%
|
Caking and flow risk
|
|
Residue on ignition
|
≤ 0.1%
|
Inorganic carry-over
|
|
Particle size
|
Customisable (micronised available)
|
Dissolution and blend uniformity
|
|
Packaging
|
1 kg foil bag / 25 kg fibre drum, double PE liner
|
Moisture barrier
|
Who Buys It, and What They Buy It For
There are three well-defined groups demanding tadalafil powder. Firstly, generic pharmaceutical manufacturers preparing finished dosage forms under their own marketing authorisations. Secondly, licensed compounding pharmacies operating to prescription. Thirdly, analytical laboratories requiring reference-grade material for method development and stability studies. Each group wants something a little bit different. Generic manufacturers’ regulatory submissions rely on impurity profiles and batch-to-batch assay uniformity; thus, these are the key priorities. Particle size and flow matter to compounders. Laboratories demand well-characterized material with comprehensive chromatographic data. At the quote stage, Hongda’s commercial team will scope the desired application so that the proper grade, mesh, and documentation package is matched from the beginning, rather than after a failed pilot run.
How the Powder Is Made: Process Controls That Decide Quality
Synthesis, Purification and the Impurity Story
Quality of a synthetic API is written at the time of production, not during testing; testing only tells you what the process already determined. At Hongda, tadalafil powder is produced via a regulated multi-step synthetic pathway. At each stage, the reaction temperature, residence time, and reagent stoichiometry are monitored. The method then uses recrystallization to reduce process-related contaminants and residual intermediates. The process is monitored in-process by HPLC throughout each purification pass, allowing operators to know before the next step whether the batch is tracking to specification. This is important because the most frequent contaminants in poorly regulated material are unreacted intermediates and degradation products that will only show up months later in a customer's stability chamber. It is far cheaper to control them at the crystallisation stage than to find them in an accelerated stability breakdown.[1]
Crystallisation, Polymorph Consistency and Particle Engineering
Tadalafil is known to have more than one crystalline form, and polymorphism influences the dissolving behaviour – a silent but severe danger for any client operating a bioequivalence study. Hongda controls the solvent system, cooling rate, agitation speed, and seeding technique to ensure that each batch of tadalafil powder crystallises to the same form, validated by XRD or DSC when the customer’s file demands it. Material is dried and processed to agreed specification. Micronized grades are offered for compositions where surface area drives dissolution. The API’s PSD wanders between shipments and the mix homogeneity of a low-dose tablet collapses fast. So, particle size distribution is measured and reported, not guessed.
100,000-Class Workshops and Batch Record Discipline
Production is carried out in 100,000 class clean rooms under cGMP with gowning, airlocks, differential pressure monitoring and environmental sampling with a crew of over 150 trained personnel. Each batch of tadalafil powder is accompanied by a batch record connecting the raw-material lot numbers, equipment IDs, operator signatures, in-process results, and final release data, preserved and accessible for client scrutiny. With 3,000 tons of annual plant capacity across its product range, and a 3,000 m2 warehouse divided into six controlled zones for storage, Hongda can maintain validated stock, rather than having to improvise a fresh campaign for each order. This is why lead times remain predictable, even if a customer’s forecast does not.

How Quality Is Actually Tested
Assay and Identification by HPLC
The anchor test is a reversed-phase HPLC with UV detection at ~285 nm, conducted against a certified reference standard. Identity is confirmed by retention time match. Assay determined by peak area vs. standard curve. Hongda requires ≥99.0% on a dried basis. Methods are verified for specificity, linearity, accuracy, precision, LOD/LOQ, and robustness according to ICH Q2 standards, and system appropriateness is proven on each run prior to acceptance of any tadalafil powder result. Identification support is provided by IR spectroscopy against a reference spectrum and, if specified, UV scanning. This multi-layered technique implies that a sample cannot pass on a single accidental match – it must agree chromatographically, spectroscopically and physically.[4][5]
Related Substances, Residual Solvents and Elemental Impurities
|
Test
|
Method
|
Control Limit
|
Instrument
|
|---|---|---|---|
|
Related substances
|
Gradient RP-HPLC
|
Individual ≤0.10%, total ≤0.5%
|
HPLC-UV
|
|
Residual solvents
|
Headspace GC
|
ICH Q3C Class 2/3 limits
|
GC-FID/MS
|
|
Elemental impurities (Pb, Cd, As, Hg)
|
Acid digestion, ICP-MS / AAS
|
ICH Q3D oral limits
|
ICP-MS / AAS
|
|
Metal-complex (chelation) screening
|
Chelating-agent titration & AAS recovery
|
Report value
|
Automatic titrator + AAS
|
|
Water content
|
Karl Fischer / LOD
|
≤0.5%
|
KF titrator
|
|
Residue on ignition
|
Gravimetric, 600°C
|
≤0.1%
|
Muffle furnace
|
|
Microbial limits
|
Plate count, specified pathogens
|
Pharmacopoeial
|
Incubators
|
A remark on Hongda’s chelation-rate screening: Trace metals from catalysts may bind to organic residues and distort recovery in ordinary AAS testing. The lab performs a chelating-agent digestion stage and spiking recovery to ensure the metal numbers stated for each batch of tadalafil powder are real and not artefacts of partial extraction.[3]
Want to see the actual data before you commit? Email duke@hongdaherb.com with your target specification and we will send a current batch COA, the related-substances chromatogram, residual-solvent GC report and ICP elemental data — plus a sample for your own third-party verification.
Adulteration and Counterfeit Identification
There is a substantial grey market for this chemical, and dilution with lactose, starch, mannitol, or sildenafil-family compounds is a reported concern. Hongda's defence is multi-tiered: HPLC assay shows dilution immediately since a cut sample can’t be 99%; gradient chromatography with photodiode-array detection shows foreign peaks and mismatched UV spectra; IR fingerprinting catches bulk substitution; and melting-point determination alerts to gross impurity. On request, mass spectrometric confirmation is provided for clients supplying heavily controlled markets. Hongda produces its own tadalafil powder, rather than selling repackaged material from anonymous middlemen; thus there is no blind link in the chain where replacement may take place — a factor auditors seem to value more than any certificate.[4][5]
Handling, Compatibility and ComplianceMoisture Uptake, Caking and Storage in Practice
The molecule itself is just somewhat hygroscopic, but finely milled material has a huge surface area and can absorb ambient water in humid ports and warehouses, causing lumping, poor flow in tablet feeders, and weight variation issues. Hongda exports tadalafil powder at ≤0.5% loss on drying in heat-sealed aluminium-foil bags with double PE liners in fibre drums. Desiccant sachets and nitrogen flush are offered for tropical locations. Store below 25°C, at 60% relative humidity, protected from light. Drums should be closed after sampling. Practical case: A generics manufacturer in Eastern Europe experienced hopper bridging during tablet compression of a micronized lot from a former supplier. Hongda provided a controlled PSD grade in nitrogen-flushed foil, and the customer confirmed stable flow and uniform tablet weight over a 400 kg validation run before placing repeat orders.[5][6]
Excipient Compatibility and Formulation Behaviour
Due to its poor aqueous solubility, formulators generally blend the API with disintegrants like croscarmellose sodium, surfactants like sodium lauryl sulphate, and carriers like lactose monohydrate or microcrystalline cellulose. All routes are viable: wet granulation, dry granulation, and direct compression. Hongda’s two in-house R&D institutes provide clients with binary compatibility tests, keeping tadalafil powder with each proposed excipient under accelerated conditions and monitoring assay and impurity growth by HPLC at set intervals. This avoids the traditional late-stage surprise of a selected excipient slowly accelerating deterioration. We can generate specialised PSD windows, co-processed presentations and micronized grades on request.
Documentation Package for EU and US Buyers
Each shipment is accompanied by a full-panel COA, MSDS, production flow chart, specification sheet, method summaries, residual-solvent and elemental-impurity reports, TSE/BSE and GMO declarations, stability data and packing-list traceability. Hongda’s qualification portfolio – National High-tech Enterprise status since 2010, cGMP, ISO 9001, ISO 22000, FSSC 22000, BRC, SC license, FDA registration, Halal, Kosher and various national patents – provides importing QA teams with a recognised framework to audit against. On-site and remote audits are invited, and retention samples are taken for the complete shelf life so that any downstream question may be evaluated against the actual material rather than a reconstruction.[1][2][3][5][6]

Conclusion
What Is Tadalafil Powder? A clearly defined synthetic crystalline active pharmaceutical ingredient, chemically. A substance whose commercial worth is nearly completely derived from the rigour of its manufacture and verification. Hongda controls the synthesis, fixes the crystallisation to protect polymorph consistency, and releases nothing without HPLC assay, related-substances profiling, residual-solvent GC, ICP elemental screening, Karl Fischer moisture and microbial testing, all documented batch by batch in an SGS-standardised laboratory. Add cGMP-compliant 100,000-class workshops, moisture-proof packaging and a full EU/US dossier, and you have a supply partner your QA department can stand behind. Order your sample and the accompanying data immediately.
FAQ
Q1: What is the CAS number and typical purity of your tadalafil powder?
CAS 171596-29-5, with assay ≥99.0% by HPLC on a dried basis.
Q2: Which tests are run on every batch?
HPLC identity and assay, related substances, residual solvents by GC, elemental impurities by ICP/AAS, Karl Fischer moisture, residue on ignition and microbial limits.
Q3: Do you control polymorphic form and particle size?
Yes — crystallisation parameters are fixed, and XRD/DSC confirmation plus customised or micronised PSD are available.
Q4: How is caking prevented during shipping?
Low moisture (≤0.5%), heat-sealed aluminium-foil bags, double PE liners, fibre drums, with desiccant and nitrogen flush on request.
Q5: Who may purchase this material?
Only licensed pharmaceutical manufacturers, authorised compounders and research institutions holding the relevant permissions.
Work With HONGDA — Get Your Batch Data and Sample
Specification sheets are easy to write; chromatograms are not. Ask Shaanxi Hongda Phytochemistry Co., Ltd. for the evidence behind the number — related-substances profile, residual-solvent GC, ICP elemental report, Karl Fischer moisture, polymorph confirmation and a stability summary — and verify a sample in your own laboratory before you commit to a container. Tell us your required assay, particle size, packaging format, and destination market, and our technical team will respond with a quotation and the complete compliance dossier, including cGMP, ISO 9001, FSSC 22000, BRC, and FDA registration documentation. Licensed buyers can reach us directly at duke@hongdaherb.com — send your enquiry today and let Hongda supply tadalafil powder you can stand behind.
References
1. International Council for Harmonisation. ICH Q3A(R2): Impurities in New Drug Substances.
2. International Council for Harmonisation. ICH Q3C(R8): Guideline for Residual Solvents.
3. International Council for Harmonisation. ICH Q3D(R2): Guideline for Elemental Impurities.
4. International Council for Harmonisation. ICH Q2(R2): Validation of Analytical Procedures.
5. United States Pharmacopeia. USP General Chapters <621> Chromatography, <731> Loss on Drying, and <233> Elemental Impurities — Procedures.
6. European Directorate for the Quality of Medicines & HealthCare. European Pharmacopoeia, General Monograph: Substances for Pharmaceutical Use.
